Although it is recommended that the latest drivers be installed, as they patch security vulnerabilities and increase reliability, that is not always the case. More often than not, new drivers can be unstable and glitchy. If you wish to stay on your current driver(s) and prevent Windows from updating them automatically, this post illustrates how you can stop specific hardware drivers from updating, while the rest of the drivers can continue to update normally.

Identify Hardware IDs

Before you begin preventing a particular driver from updating automatically, you must know the associated hardware IDs. These are then used to define which drivers prevent updates. The manufacturer defines hardware IDs, which helps Windows bind the right INF file (contains information for the installation components used to install a driver) with that hardware. Usually, more than one hardware ID is assigned to each hardware. Follow the steps below to determine the hardware IDs for a device that you no longer want to update the driver of: Now that you have the hardware IDs for the hardware, they can be used for the next phase of the process: disabling specific driver updates.

Stop Windows From Automatically Updating Specific Drivers

You can prevent specific drivers from updating using the hardware IDs that were determined earlier. This task can be achieved using 2 methods:

Using Group Policy EditorUsing .reg file

If you are using the Home Edition of Windows, you will not be able to perform the task using the Group Policy Editor. In that case, you may resort to the 2nd method. Alternatively, learn how to enable the Group Policy Editor in Windows 10 and Windows 11.

Using Group Policy Editor

From here on out, Windows Update will not download and install updates for the specified hardware drivers. However, if you want to revert the changes and enable automatic updates for the driver(s), select the Disabled or Not Configured radio button from the Group Policy “Prevent installation of devices that match any of these device IDs.”

Using .REG File

You can also create a Registry File that will make the necessary changes to the Windows Registry to block automatic driver updates against the given hardware IDs. Let us guide you through the process of creating a .reg file since you will need to edit it according to your hardware ID. Misconfiguration of critical values in the system’s registry could be fatal for your operating system. Therefore, we insist that you create a system restore point before proceeding forward with the process. To stop a specific driver from updating, paste the following text into Notepad while replacing HardwareIDs with the hardware IDs noted earlier through Device Manager. There are a few factors to consider when making this .reg file. Not only do you have to replace HardwareIDs, but also replace backslashes () in the hardware IDs with double backslashes (\). For example, a hardware ID “USB\VID_0CF3&PID_E007″ will need to be written as “USB\VID_0CF3&PID_E007.” Moreover, you can also add more hardware IDs using the string values (1, 2, 3…), or decrease them by removing the entire row from the text above. Here is an example of our final text file:

Once you have configured the text file, save it with the following settings:

Save as type: All FilesFile name: Any name with .reg extension

The .reg file will now be created. Simply double-click the file to run it. If prompted with a UAC and confirmation, click Yes. Once executed, restart your computer for the changes to take place. The specific driver will no longer be updated. That being said, you can still edit the hardware IDs by editing the .reg file and rerun it. If you want to re-enable the updates for the specified drivers, you can download and run the .reg file we have ready for you (no changes are required). Once executed, reboot your computer for the changes to take effect.   Disable Automatic Driver Updates in Windows 11 .reg (unknown, 285 hits) If you prefer disabling all driver updates, follow the methods given below.

Prevent Automatic Driver Update in Windows

If you want to disable automatic updates for all drivers, that can also be achieved. In this case, hardware IDs will not be required.

Using Group Policy

Windows Update will no longer download or install any drivers. However, if you want to re-enable automatic driver updates, simply return to the same Group Policy, select the Disabled or Not Configured radio button, and restart your computer.

Using Registry Editor

If you are running Windows Home edition, you will not have the Group Policy Editor enabled by default. In that case, you can use this method to disable all driver updates through Windows Update. Misconfiguration of critical values in the system’s registry could be fatal for your operating system. Therefore, we insist that you create a system restore point before proceeding with the process. Windows Update will no longer download or install driver updates. However, if you want to re-enable this feature in the future, you may simply delete the DWORD you have created and reboot your PC.

Closing Words

As we have mentioned earlier in this post, drivers bring in more reliability to hardware, along with security updates. It would not be wise to disable driver updates entirely, as it will leave your PC and hardware vulnerable to vulnerabilities that attackers can exploit. We recommend that you re-enable automatic driver updates once your task is done, or when you are certain the available update is stable and free from bugs. If not, you can manually install driver updates by downloading them through the manufacturer’s website. Also see:

5 Ways to Enable/Disable Automatic Updates for Microsoft Store Apps in Windows3 Ways To Remove/Disable Microsoft Account In Windows 11/104 Ways To Block Windows 11 22H2 And Windows 10 22H2 Feature Update From Installing4 Ways to Disable Windows 10 Automatic Restart3 Ways To Disable Automatic Driver Updates In Windows 10